PD3 960 x 480 mm

Exclusive 3D EPS decorative panels are made from expanded polystyrene (EPS) using technology that enables the production of details of various shapes and any texture of the decorative surface. Decorative panels are made in sizes of 960x480mm and thickness about 31mm. - Purpose and scope of application Decorative 3D panels are intended for indoor use. Installation of panels to walls or ceilings is done by using commercially available adhesives for polystyrene.It is recommended to use adhesive in tube, which provides convenient applying on the panel and then installing to the wall or ceiling. Products are not resistant to organic solvents such as acetone, nitro compounds, petrol, etc. Do not install panels near heat sources. - Installation instructions Apply a layer of adhesive to the smooth surfaces of the panels' contact with the substrate. The substrate, on which the panel will be installed, should be even, dry, free from dust and grease. When installing panels on paint coatings, peel off the paint as well as cracked and fallen plaster. Large surface defects must be filled with spackling paste so that the contact point of the panel with the substrate is smooth. EPS decorative panels allow great freedom of interior design due to easy cutting of shapes with a wallpaper cutter. Panels can be installed in fragments forming protruding motifs on a smooth wall or cover a whole or larger area. To cover the entire surface of the wall, start with one of the corners and arrange the panels in parallel rows. Before installing the first panel, cut off the protruding elements to get a straight vertical edge.Apply the adhesive only to the back of the panel. When gluing, press the panel firmly, while paying attention to not damage the decorative surface. Panels are designed for painting with water-based paints. The product does not require special precautions. The product is not intended for children. Products are recyclable.